No-Name flybikes bmx BMX Race
7.991 visninger
|
Oprettet:
No-Name flybikes bmx
Type:
BMX Race
Stel:
flybikes pantera euro BB
Forgaffel
lightweigt fra Tyskland.
Bremser
Fly Bikes Brake
• Starts out as T6061-6 forged alumnium (the strongest treatment available), then is machined on a 3D machine. Both forging and 3D machining cost a fortune but the final product is super stuff and the finish is perfect.
• The arms are angled in the direction of the cable to increase the braking power and to make it smooth.
• The reinforcements to prevent flex make the machining even more complicated but are worth it.
• The cable bridge is also CNC machined so your cables don't bend (sorry this is not shown in the picture).
• The spring are cut and the plates are as low as possible due to the smaller cone allen bolts.
• The pads are Kool Stop.
• All hardware, including the springs, are anodised in black or titanium finish.
• Each brake takes 6 hours to make (according to Fly!) that's why there has been a delay in production (and an increase in cost...).
• Starts out as T6061-6 forged alumnium (the strongest treatment available), then is machined on a 3D machine. Both forging and 3D machining cost a fortune but the final product is super stuff and the finish is perfect.
• The arms are angled in the direction of the cable to increase the braking power and to make it smooth.
• The reinforcements to prevent flex make the machining even more complicated but are worth it.
• The cable bridge is also CNC machined so your cables don't bend (sorry this is not shown in the picture).
• The spring are cut and the plates are as low as possible due to the smaller cone allen bolts.
• The pads are Kool Stop.
• All hardware, including the springs, are anodised in black or titanium finish.
• Each brake takes 6 hours to make (according to Fly!) that's why there has been a delay in production (and an increase in cost...).
Dæk
front tyre Tioga Factory FS 100
Rear tyre Revenge Industrie =110 PSI=
Rear tyre Revenge Industrie =110 PSI=
Hjul
Front wheel.
Odyssey - Hazard Lite Rim
Based on the original Hazard rim with thinner walls and shorter sidewall for less weight.
Triple wall design.
Welded seam and inclined spoke holes for increased strength.
One of our most popular rims.
Black Anodised or Chrome Plate.
480g.
36H.
Rear Wheel
Odyssey Seven K-A rim.
The Seven K-A is the replacement for the original Seven K. This rim is made from genuine 7005 aluminum and features inner wall supports for greater reliability.
The Seven K-A is everything the original rim would've been, had the manufacturer stuck to the specifications that were contractually agreed upon. Unfortunately, things don't always go according to plan in mass-production, so we've been forced to deal with a series of processing inconsistencies that were beyond our control.
The Seven K-A rim is the first BMX rim to use 7005 series Aluminum. Like any other Aluminum applications, 7000 series is superior to 6000 series in strength, so the product can be scaled down and lightened up without sacraficing durability. The Seven K rim is wider and lighter than the already proven hazard lite, while being just as strong. Seven K is available in Chrome and Hard anodize. While not Duralectra, this process is a huge improvement to the standard anodized black rim.
453g.
Odyssey - Hazard Lite Rim
Based on the original Hazard rim with thinner walls and shorter sidewall for less weight.
Triple wall design.
Welded seam and inclined spoke holes for increased strength.
One of our most popular rims.
Black Anodised or Chrome Plate.
480g.
36H.
Rear Wheel
Odyssey Seven K-A rim.
The Seven K-A is the replacement for the original Seven K. This rim is made from genuine 7005 aluminum and features inner wall supports for greater reliability.
The Seven K-A is everything the original rim would've been, had the manufacturer stuck to the specifications that were contractually agreed upon. Unfortunately, things don't always go according to plan in mass-production, so we've been forced to deal with a series of processing inconsistencies that were beyond our control.
The Seven K-A rim is the first BMX rim to use 7005 series Aluminum. Like any other Aluminum applications, 7000 series is superior to 6000 series in strength, so the product can be scaled down and lightened up without sacraficing durability. The Seven K rim is wider and lighter than the already proven hazard lite, while being just as strong. Seven K is available in Chrome and Hard anodize. While not Duralectra, this process is a huge improvement to the standard anodized black rim.
453g.
Gear
Singlespeed 27-11 gearing.
Styr
Fly Bikes Pantera Bars
The NEW 9 butted Sergio Layos signature bars. These bars are the exact sweep & measurements to Sergio's taste. The bars are strong & very light.
• Now 9 butted cromoly heat treated.
• Height : 185mm (7.28")
• Crossbar Length : 220mm (8.74")
• Crossbar Height : 120mm (4.72")
• Up Sweep : 3 degree
• Back Sweep : 10 degree
• Weight : 640g - 1.84lbs (uncut)
Saddel
Shadow Conspiracy Slim Seat
• Designed by Ryan Sher.
• It's slim, it's light.
• 8mm rails.
• Protective nose and tail bumpers.
• Kevlar nose and tail.
• 12 oz/600g.
• Designed by Ryan Sher.
• It's slim, it's light.
• 8mm rails.
• Protective nose and tail bumpers.
• Kevlar nose and tail.
• 12 oz/600g.
Ekstraudstyr
flybikes cranks bliver ikke lavet mere. euro bb
Three piece crank by flybikes.
Arm length: 175mm.
Axle: 19mm.
Weight: 1,16 Kg
Fly Bikes Stem
• CNC machined 6061-T6 aluminum.
• 53 mm. reach.
• Comes with detangler plate.
• 320 g.
Wellgo MG1 Magnesium Pedals
• Money-to-weight this is probably the best value item you can buy it you want to save weight on your bike.
• These sealed bearing pedals have an original DX feel but have a slightly larger surface area.
• Pins are replaceable.
• Light magnesium body, although not a strong as aluminium. If you break pedals or do pedal grinds we'd advise an alloy pedal instead.
• These pedals are amazingly light - they weigh less than half the weight of Primo Super Tenderizers.
• 9/16" (for 3 piece cranks) only.
Odyssey Intac Seatpost
• Redesigned post has bottom of guts and post as one piece.
• Guts have added material to stop gut flare.
• Shorter.
• Larger teeth have better engagement to almost eliminate stripping/slipping.
• Remember, other posts may boast slighty lighter weights, but check out the length.
• If you cut down the Intac, its probably lighter than any post it is not lighter than now. The Intac is the standard for easy installation.
• When talking about strength, we compare this Aluminum to the Chromoly posts that it BEATS.
• 6061 T-6 alloy.
• Black only.
• 25.4 to fit 99% of modern street frames.
• Now also availble in 26.8 to fit most alloy race frames (Avent, etc.). Please note the 26.8 size is full-length - not short like the 25.4.
Demolition Dumb Chuck Pegs
• CNC'd alloy pegs with Plastic (Polypropylene) sleeve that fits over the peg.
• Developed for use in skateparks where metal pegs are banned.
• Pair.
Proper cassette hub - gold.
Weight: 0,54 Kg
The Proper cassette hub has a compact shell design to keep the weight down. It also uses a single needle bearing in the driver taking the place of 3 conventional sealed bearings for improved strength and reliability. Available in left and right hand drive with your choice of 10, 11, 12, 13 and 14 tooth cogs to keep everyone happy!
Odyssey Vandero front hub
• Lightweight pro style front hub, maintains strength while using low amount of material by using 7075 aluminium shell.
• 2 bearings over 4140 heat-treated axle.
• Long axle allows use of pegs.
• Compatible with Kink/Standard and Loophole Ti replacement axles.
• Currently our most popular front hub.
• 318g.
• Now in 3 colours!
• 36h only.
Three piece crank by flybikes.
Arm length: 175mm.
Axle: 19mm.
Weight: 1,16 Kg
Fly Bikes Stem
• CNC machined 6061-T6 aluminum.
• 53 mm. reach.
• Comes with detangler plate.
• 320 g.
Wellgo MG1 Magnesium Pedals
• Money-to-weight this is probably the best value item you can buy it you want to save weight on your bike.
• These sealed bearing pedals have an original DX feel but have a slightly larger surface area.
• Pins are replaceable.
• Light magnesium body, although not a strong as aluminium. If you break pedals or do pedal grinds we'd advise an alloy pedal instead.
• These pedals are amazingly light - they weigh less than half the weight of Primo Super Tenderizers.
• 9/16" (for 3 piece cranks) only.
Odyssey Intac Seatpost
• Redesigned post has bottom of guts and post as one piece.
• Guts have added material to stop gut flare.
• Shorter.
• Larger teeth have better engagement to almost eliminate stripping/slipping.
• Remember, other posts may boast slighty lighter weights, but check out the length.
• If you cut down the Intac, its probably lighter than any post it is not lighter than now. The Intac is the standard for easy installation.
• When talking about strength, we compare this Aluminum to the Chromoly posts that it BEATS.
• 6061 T-6 alloy.
• Black only.
• 25.4 to fit 99% of modern street frames.
• Now also availble in 26.8 to fit most alloy race frames (Avent, etc.). Please note the 26.8 size is full-length - not short like the 25.4.
Demolition Dumb Chuck Pegs
• CNC'd alloy pegs with Plastic (Polypropylene) sleeve that fits over the peg.
• Developed for use in skateparks where metal pegs are banned.
• Pair.
Proper cassette hub - gold.
Weight: 0,54 Kg
The Proper cassette hub has a compact shell design to keep the weight down. It also uses a single needle bearing in the driver taking the place of 3 conventional sealed bearings for improved strength and reliability. Available in left and right hand drive with your choice of 10, 11, 12, 13 and 14 tooth cogs to keep everyone happy!
Odyssey Vandero front hub
• Lightweight pro style front hub, maintains strength while using low amount of material by using 7075 aluminium shell.
• 2 bearings over 4140 heat-treated axle.
• Long axle allows use of pegs.
• Compatible with Kink/Standard and Loophole Ti replacement axles.
• Currently our most popular front hub.
• 318g.
• Now in 3 colours!
• 36h only.
Bemærkninger
super fed Bmx samlet over 2 år
bliver desværre ikk brugt lige for tiden der jeg har en knæskade :(
bliver desværre ikk brugt lige for tiden der jeg har en knæskade :(
No-Name flybikes bmx
jul 2017
Følger: 1
apr 2009
Følger: 3 Følgere: 2 Cykler: 1 Emner: 6 Svar: 17
fed cykel ! elsker detaljerne! ... men hvor har du anskaffet det " Bmx is not a crime" klister mærke??
jan 2008
Følger: 18 Følgere: 17 Cykler: 3 Emner: 6 Svar: 52
ga lige en høj gi lige en igen på min eastern
sep 2007
Følger: 19 Følgere: 18 Cykler: 6
X-høj..alt for fedl!!!!!!!....hvad vejer sådan en nice bike ? tjek også lige mine bmx'er ud også!!
sep 2007
Følger: 19 Følgere: 18 Cykler: 6
X-høj..alt for fedl!!!!!!!....hvad vejer sådan en nice bike ? tjek også lige mine bmx'er ud også!!
jan 2007
Følger: 40 Følgere: 40 Cykler: 4 Emner: 10 Svar: 154
mar 2007
Følger: 2 Følgere: 1 Cykler: 1 Emner: 1 Svar: 9
Den cykel er squ alt for fed.. Super flotte detaljer og masser af dem.. respekt herfra da
okt 2006
Følger: 6 Følgere: 5 Cykler: 3 Emner: 4 Svar: 10
Flot BMX!!! høj til dig... den mangler bare lige nogle pegs... Stem på mine BMX'er tak.....
jan 2007
Følger: 1 Følgere: 1 Cykler: 1 Emner: 3 Svar: 8
Hey! Fed cykel ! Har smidt en X
jul 2006
Følger: 84 Følgere: 82 Cykler: 1 Emner: 44 Svar: 105
hej har givet x høj giver du ikk lige et eller andet på min nishiki
jul 2006
Følger: 1 Cykler: 1
er knæet snart helt igen, sådan en maskine har ikke godt af at stå for længe af gangen..he
jun 2006
Følger: 2 Følgere: 1 Cykler: 2
fed bmx... høj hefra...smider du ikke lige to tilbage;)
jul 2006
Følger: 3 Følgere: 2 Cykler: 2 Emner: 13 Svar: 43
feb 2006
Følger: 14 Følgere: 13 Cykler: 1 Svar: 1
7,1 kg
apr 2006
Følger: 4 Følgere: 3 Cykler: 2 Emner: 3 Svar: 8
den kan jeg sgu godt li den cykel der........
gav x-høj
gi du en igen...
feb 2006
Følger: 1 Cykler: 1
BMX for life
feb 2006
Følger: 2 Følgere: 1 Cykler: 1 Emner: 2 Svar: 12
Mega nice bike !!
Gav dig ( X-høj )
Giver du ikke lige igen ?
smider du ikke også en kommentar og en stemme i mn udfordring ?
Ps.
Mega nice bike !!
(fræk)
feb 2006
Følger: 21 Følgere: 20 Cykler: 3 Emner: 34 Svar: 367
Hvad har du givet for dine hubs?
feb 2006
Følger: 21 Følgere: 20 Cykler: 3 Emner: 34 Svar: 367
De er jo osse lavet af alu
feb 2006
Følger: 2 Følgere: 1 Cykler: 1
Jo jeg har kørt med dem i et halvt år uden problemer. men det er magnesium så jeg vil råde dig til ikke at lave nogle pedal-grinds for så forsvinder de på ingen tid...
feb 2006
Følger: 21 Følgere: 20 Cykler: 3 Emner: 34 Svar: 367
Hej
Er de der pedaler ikke udmærket?
Ved godt det ikke er det vildeste..
Jeg har nemlig tænkt på at købe sådan nogle...
feb 2006
Følger: 7 Følgere: 6 Cykler: 4 Svar: 1
here nice bmx du får høj når du er inde håber du gir tilbage